Kailifeng Dongfeng Caput 5 - cubic - meter foam fire engine

Kailifeng Dongfeng Caput 5 - cubic - meter Foam Fire Engine

Practical volume and precise fire extinguishing

Facing diverse fire situations in urban and rural areas, fire trucks need to be "well - stocked with ammunition" and "accurate in striking." The liquid - carrying capacity of this CAPTAIN foam fire truck reaches 5 cubic meters (3.5 cubic meters of water + 1.5 cubic meters of foam). 3.5 cubic meters of water can meet the continuous cooling needs of small and medium - sized factories, and 1.5 cubic meters of foam can cover an initial oil fire of 300 square meters. The proportion is just suitable for the scale characteristics of urban and rural fires. The water tank is made of high - quality carbon steel plates with a 4 - mm bottom plate, 3 - mm side plates, and sealing plates. The internal anti - corrosion treatment ensures clean water quality. The foam tank is made of stainless steel with a 4 - mm bottom plate, 3 - mm side plates, and sealing plates. Its corrosion resistance ensures that the foam liquid does not deteriorate during long - term storage.

The fire - fighting core system of this vehicle is equally practical and efficient. It uses a CB10/30 normal - pressure fire - fighting pump with a rated flow rate of 30L/s @ 1.0MPa, outputting 1.8 tons of fire - fighting medium per minute. With a priming time of ≤ 35s, it can quickly respond to the initial fire situation.

The water range of the PL8/24 fire monitor is ≥ 55 meters, and the foam range is ≥ 42 meters. A range of 55 meters is sufficient to cover the fire point of an 18 - story building or a large - scale warehouse. With a horizontal 360° and pitching - 35° to 70° spraying angle, and equipped with a PH64 ring - pump foam proportioning mixer, it can accurately complete the tasks, whether it is suppressing solid fires with water flow or smothering oil fires with foam.

Flexible chassis and powerful power

Urban and rural roads often vary in width, placing higher demands on the mobility of fire trucks. This vehicle is equipped with a Dongfeng Duolika National VI chassis, a 4×2 drive type combined with a 3800mm wheelbase, and a compact body of 7000x2230x3030mm. It can easily pass through narrow rural roads and make flexible turns in the truck passages of industrial areas. The rated power of the engine is 121KW (about 164 horsepower), and the maximum speed is 103km/h. Even when fully loaded with 5 cubic meters of liquid, it can still maintain strong power, ensuring a "rapid arrival" from urban fire stations to rural fire scenes.

The cab design balances practicality and comfort: It features a flat - front four - door double - row structure. The layout consists of 3 people in the front row (including the driver) and 3 people in the back row, enabling a 6 - person combat team to set out simultaneously. Three air respirator brackets can be optionally installed in the back row, keeping the equipment ready along with the personnel. The 100W siren, power - take - off control switch, etc. are centrally arranged in the driving area, within easy reach. The sandwich - type full - power power - take - off is controlled by a solenoid valve, with a forced water - cooling + splash - lubrication design. It can stably output power even during continuous operation, ensuring that fire - fighting operations proceed without interruption.

Convenient operation and scientific layout

Urban and rural rescue scenes often lack a professional command environment, and the ease of operation directly determines the rescue efficiency. The vehicle's electrical system can be regarded as a "mobile lighting station": the 1.6-meter-long row of LED warning lights on the top of the cab has strong penetration, the 360-degree remote-controlled searchlight on the rear top can illuminate the night-time fire scene, and the two sets of strobe lights + side lighting lights on both sides ensure driving safety and operating vision under complex road conditions.

The equipment box adopts a structure of high-quality section steel framework + oxidized aluminum alloy chequered plate. There is one aluminum alloy rolling shutter door on each of the left and right sides of the front box and the rear pump room. It is lightweight and noiseless, and can be opened while standing on the ground. The equipment layout strictly follows the "retrievable within two actions" principle: commonly used equipment such as suction pipes and fire hoses are arranged according to the combat logic. With the ergonomic brackets, firefighters can quickly retrieve them without additional climbing. The seamless steel pipe pipeline connects various components through flanges. The pipeline for water outlet from the tank and the pipeline for external water inlet are designed to adapt to the common water source interfaces in urban and rural areas, ensuring smooth and efficient water supply every time.