Kailifeng Isuzu 4-cubic-meter 700P Foam Fire Engine

Kailifeng Isuzu 4-cubic-meter 700P Foam Fire Engine, the all-round responder to urban fires!

Fire fighting is fast, accurate and decisive

In response to urban fires, the core principle is to "extinguish fires early and when they are small", which requires fire trucks to have both rapid water - discharging capabilities and precise coverage. This Isuzu foam fire truck is equipped with a CB10/40 normal - pressure fire pump. The rated flow rate reaches 40L/s@1.0MPa, which means it can output 2.4 tons of water or foam liquid mixture per minute, enough to cover an initial fire area of 80㎡ within 30 seconds. The priming time of its piston - type vacuum pump is ≤35s. Even under limited water source conditions such as residential area fire hydrants, it can quickly establish a fire - fighting link.

The matching PL8/32 dual - purpose fire monitor brings "precision strike" to the extreme: the water range is ≥ 60 meters, and the foam range is ≥ 48 meters. 60 meters is equivalent to the height of a 20 - story residential building, easily covering the fire situation of multi - story buildings. With a horizontal rotation angle of 360° and a pitching angle of - 35° to 70°, it can flexibly respond to fires in the depth of shops or at the corners of corridors. The PH64 loop - pump foam proportioner with an adjustable ratio of 3% - 6% allows water and foam to be proportioned as needed. For ordinary solid fires, high - pressure water flow is used for suppression, while for oil fires, foam is switched to suffocate the fire. One vehicle serves the functions of two vehicles, adapting to various urban fire situations!

The design of the liquid carrying capacity further demonstrates urban intelligence: The combination of a 3000L water tank and a 1000L foam tank can not only meet the continuous extinguishing of small and medium - sized fires, but also avoid the impact of heavy loads on the mobility of urban roads. The water tank is made of high - quality carbon steel plates with a 4mm bottom plate, 3mm side plates and sealing plates. The internal anti - corrosion treatment ensures clean water quality. The foam tank is made of stainless steel with a 4mm bottom plate, 3mm side plates and sealing plates. Its corrosion resistance ensures that 1000L of foam liquid can be stored for a long time without deterioration and is ready for use at any time.

Urban Rescue Vanguards

On the busy urban roads, the mobility of fire trucks directly determines their arrival speed. This vehicle is equipped with an Isuzu National VI chassis, and its engine has a rated power of 139KW (about 189 horsepower). The 4×2 drive type combined with a wheelbase of 3815mm enables the vehicle to reach a maximum speed of 110km/h even with a compact size of 7130x2320x3060mm, and it can turn flexibly in narrow streets and alleys.

The cab adopts a flat - head four - door double - row design. The layout is 3 people in the front row (including the driver) + 3 people in the back row, which just meets the needs of a 6 - person combat team to set out simultaneously. Three air respirator brackets can be optionally installed in the back row, allowing the equipment to accompany the personnel. A 100W siren, power take - off control switch, etc. are centrally arranged within easy reach in the driving area. The sandwich - type full - power power take - off is controlled by a solenoid valve, with a rapid and stable response. Coupled with the forced water - cooling system, it ensures that the power of the fire pump does not decline during continuous operation.

Zero latency in actual combat response

Urban fire rescue often races against time, and the operational convenience directly affects the efficiency of combat deployment. The vehicle's electrical system can be regarded as a "mobile command post": the 1.6-meter-long row of LED warning lights on the top of the cab has strong penetration in complex road conditions. The 360-degree remote-controlled LED fire searchlight on the rear top can quickly lock the blind areas of the fire scene. The two sets of red flashing lights + side lighting lamps on both sides not only ensure driving safety but also provide a clear view for night-time rescue.

The equipment box adopts a structure of high-quality steel skeleton + oxidized aluminum alloy patterned plate. There is one aluminum alloy rolling shutter door on each of the left and right sides of the front box and the rear pump room. It is lightweight and noiseless, and can be easily opened from the ground. The equipment layout strictly follows the "retrievable within two actions" principle: commonly used equipment such as suction hoses and fire hoses are arranged according to combat logic. Together with the ergonomic brackets, firefighters can quickly access them without bending over or climbing. The seamless steel pipe pipelines connect various components through flanges. The pipeline for water outlet from the tank and the pipeline for external water inlet are reasonably designed to ensure "zero obstruction" in the transportation of fire extinguishing media.